bullseyeglass.com • View topic - Slump a BIG curve

Slump a BIG curve

For discussion of processes related to using Bullseye glass, including kilnforming and kilncasting, torchwork, blowing and stained glass.

Slump a BIG curve

Postby blackbearglassart » Tue Jul 10, 2018 7:04 am

I've fused a long rainbow – 30 in. long by 4 wide. How can I slump it into an arc?

Is there a slumping mold I can buy? Or do I need to make one using stainless steel? If I need to make one, does someone with experience have any advice?

(My kiln interior is 25 x 40, 13 in. deep.)
Posts: 1
Joined: Tue Jul 10, 2018 5:45 am

Re: Slump a BIG curve

Postby marykaynitchie » Tue Jul 17, 2018 2:02 pm

You will need to make your own mold, or work with a metalworker. You can slump over stainless steel. I found a photo of a similar project that we did many years ago in Bullseye's studios. The project, called "Betweenness" was a collaboration between designers, artists, engineers, metal workers, and Bullseye's staff to make dividers for architectural spaces. The one in this photo was designed with BML Architects.

38740_106-2.jpg (97.19 KiB) Viewed 3619 times
Mary Kay Nitchie
Bullseye Glass Co.

Subscribe to Bullseye kiln-glass videos at
Posts: 1205
Joined: Thu Oct 13, 2011 5:39 am

Return to Technique

Who is online

Users browsing this forum: No registered users and 1 guest