bullseyeglass.com • View topic - Working with Stringer

Working with Stringer

For discussion and commentary regarding the Lesson and Project videos of the Bullseye Kiln-Glass Education Online program.

Working with Stringer

Postby Chris_Petrauskas » Fri Nov 11, 2011 5:28 pm

Watch the Lesson at:
https://videos.bullseyeglass.com/videos/working-with-stringer/

Please discuss and comment in this thread.

Thanks!
Chris Petrauskas
Bullseye Glass Co.
Portland, Oregon, USA
http://www.bullseyeglass.com
Chris_Petrauskas
Site Admin
 
Posts: 206
Joined: Mon Jul 14, 2008 10:55 am
Location: Portland, OR, United States

Re: Working with Stringer

Postby jdrichards » Fri Oct 31, 2014 8:23 am

Hello! I have just watched this video, and have a couple of questions: In the video, you say there is no need to anneal. The video shows a holding time of 10 minutes, the fact/help sheet has a schedule with a hold of one hour.... Confused!!- Please clarify

If using a lamp bender mold: Do I need to hold for any length of time, or do I just open the kiln once the target temp. has been reached?

Many thanks
Judith
jdrichards
 
Posts: 1
Joined: Thu Oct 13, 2011 5:39 am


Return to Online Education

Who is online

Users browsing this forum: No registered users and 1 guest