bullseyeglass.com • View topic - Tint Tone Plate

Tint Tone Plate

For discussion and commentary regarding the Lesson and Project videos of the Bullseye Kiln-Glass Education Online program.

Tint Tone Plate

Postby Chris_Petrauskas » Fri Nov 11, 2011 5:54 pm

Watch the Project at:
https://videos.bullseyeglass.com/videos/tint-tone-plate/

Please discuss and comment in this thread.

Thanks!
Chris Petrauskas
Bullseye Glass Co.
Portland, Oregon, USA
http://www.bullseyeglass.com
Chris_Petrauskas
Site Admin
 
Posts: 206
Joined: Mon Jul 14, 2008 10:55 am
Location: Portland, OR, United States

Re: Tint Tone Plate

Postby X_Stars_and_Hearts_X » Fri Feb 07, 2014 6:40 am

There is a group of colour samples shown in this lesson, could someone tell me which colours they are? I tried pausing the video in full screen view but still can't make out the numbers on the individual sheets! Thanks
X_Stars_and_Hearts_X
 
Posts: 2
Joined: Wed Jan 22, 2014 11:12 pm

Re: Tint Tone Plate

Postby marykaynitchie » Fri Feb 07, 2014 1:59 pm

Are you asking about these colors? (Don't click the arrow--it's a still photo, not an embedded video.)

<untitled> (1).jpg
<untitled> (1).jpg (63.44 KiB) Viewed 9611 times


From left to right:
Juniper Blue Tint 3mm sheet glass (001806-0030)
Pale Yellow Tint 3mm sheet glass (001820-0030)
Light Neo-Lavender Shift Tint 3mm sheet glass (001842-0030)
Grass Green Tint 3mm sheet glass (001807-0030)
Spruce Green Tint 3mm sheet glass (001841-0030)
Ruby Pink Tint 2mm sheet glass (001831-0030)

I hope this helps!

Mary Kay
Mary Kay Nitchie
Bullseye Glass Co.

Subscribe to Bullseye kiln-glass videos at
bit.ly/BullVideos
marykaynitchie
 
Posts: 1205
Joined: Thu Oct 13, 2011 5:39 am

Re: Tint Tone Plate

Postby X_Stars_and_Hearts_X » Sat Feb 08, 2014 1:11 am

Those are the ones! Thanks so much Mary Kay :)
X_Stars_and_Hearts_X
 
Posts: 2
Joined: Wed Jan 22, 2014 11:12 pm

Re: Tint Tone Plate

Postby chasgwen79 » Mon Oct 27, 2014 8:42 am

I just tried this project with the Juniper Blue tint and unfortunately, if the piece is not lying on a white surface, it just appears to be clear! I feel like maybe I need to re-fire the piece with a third layer of white glass to make the tint variations more apparent. Has anyone else tried this project out?
chasgwen79
 
Posts: 13
Joined: Fri Nov 01, 2013 5:24 am


Return to Online Education

Who is online

Users browsing this forum: No registered users and 1 guest