Gold Purple Transparent 001334
Gold Purple Transparent Sheet Glass
|
Rate | Temp | Hold |
* | 1225 | 2:00 |
600 | 1490 | :10 |
9999 | 900 | ** |
* The initial rate of heat is not a critical factor in successfully striking gold-bearing glasses. Choose an initial rate of heat appropriate to the scale and design of the project that you are firing.
** Remainder of cycle depends on the thickness of the piece. Consult the Bullseye Annealing Chart. For color-sensitive projects, we recommend testing the cycle you plan to use by fusing a small sample of a similar setup in the same kiln as the project to best predict final color results.
Lead
Selenium, Sulfur
Dark transparent blue, similar to Deep Royal Blue Transparent (001114).
Torch: Work in a cooler, oxidizing atmosphere. May develop a light brown color on the surface of the glass if worked in the presence of too much propane (or fuel).
Kiln: A linear, streaked design may develop upon firing and may be visible whether fired lengthwise or on end. Hue and saturation may also differ slightly when compared to sheet glass; a wider range is accepted due to changes that occur in the forming process.
See Working Notes under the Sheet Glass tab for additional firing information.
Consider encasing with clear to protect the surface from developing the light brown color in the hotter, neutral flame chemistry that you would use for most other styles. We advise labeling all striking glasses.
Frit made from cadmium or gold base glasses may show some variation in color within the grains, which can be more noticeable in the larger grain sizes. This is due to the wide range of color acceptability in these glasses.