No wire or drilling needed to hang jewelry and ornaments!
3 mm Base Glass Project Instructions
Use a 2-firing process when using a 3 mm base glass design. Test first in your kiln. This is a temperature-sensitive process and kilns vary.
First Firing – Make the Base
Place the bail with the split facing towards the base glass. Place the base glass over the edge of the bail, on top of the split. The overlap should be very slight, about 1–1.5 mm.
Second Firing – Decorate / Tack Fuse
Design on top of the base glass using a tack fuse
for the second firing. Tack fuse projects thicker than 8mm require slower firing than the schedule provided. See Writing Firing Schedules for Fusing and Slumping.
Featured Products
- Glass Fusible Bails, 20 Pk (007850)
- 2” Fusible Clear Circles, 6 Pk (007852)
